BS EN 16025-1:2013
$167.15
Thermal and/or sound insulating products in building construction. Bound EPS ballastings – Requirements for factory premixed EPS dry plaster
| Published By | Publication Date | Number of Pages |
| BSI | 2013 | 40 |
This European Standard specifies the requirements for in-situ formed bound EPS products (BEPS) for the thermal and/or sound insulation of buildings when applied to walls, ceilings, roofs and floors.
This European Standard covers products which are manufactured as premixed EPS dry plaster/mortar in a factory or mobile production unit.
This European Standard is a specification for the bound EPS products before installation.
This European Standard describes the product characteristics and includes procedures for testing, marking and labelling and the rules for evaluation of conformity.
This European Standard does not specify the required class or level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The classes and levels required for a given application are to be found in regulations or non-conflicting standards.
Products with a declared thermal conductivity at 10 °C greater than 0,18 W/(m . K) are not covered by this European Standard.
This European Standard does not cover factory made insulation products in the form of prefabricated shapes or boards made of bound EPS.
This European Standard also specifies performance requirements for airborne sound insulation and for acoustic absorption applications.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 7 | 1 Scope 2 Normative references |
| 8 | 3 Terms and definitions, symbols and abbreviated terms 3.1 Terms and definitions |
| 9 | 3.2 Symbols and abbreviated terms 3.2.1 Symbols 3.2.2 Abbreviated terms 4 Requirements 4.1 General |
| 10 | 4.2 For all applications 4.2.1 Factory premixed EPS dry mortar 4.2.1.1 Type of EPS aggregate 4.2.1.2 Particle size group of the EPS aggregate 4.2.1.3 Mineral binder (e.g. cement, mixtures produced by the manufacturer, including additives) |
| 11 | 4.2.1.4 Density of the EPS dry mortar 4.2.2 Fresh mortar 4.2.2.1 Mixing water 4.2.2.2 Apparent density of fresh mortar 4.2.3 Bound EPS 4.2.3.1 Thermal conductivity 4.2.3.2 Bound EPS density |
| 12 | 4.2.3.3 Reaction to fire 4.2.3.4 Durability characteristics 4.2.3.4.1 General 4.2.3.4.2 Durability of reaction to fire against ageing/degradation 4.2.3.4.3 Durability of thermal resistance against ageing/degradation 4.2.3.4.4 Durability of compression strength against ageing/degradation 4.3 For specific applications 4.3.1 General 4.3.2 Compressive stress 4.3.2.1 Compressive stress at 2 % deformation |
| 13 | 4.3.2.2 Compressive stress at 10 % deformation |
| 14 | 4.3.3 Compressibility 4.3.3.1 Thickness, dL 4.3.3.2 Thickness, dB 4.3.3.3 Compressibility, C 4.3.4 Creep 4.3.5 Water vapour diffusion resistance 4.3.6 Water absorption by short-term partial immersion |
| 15 | 4.3.7 Dynamic stiffness 4.3.8 Reaction to fire of products in standardised assemblies simulating end-use applications 4.3.8.1 General 4.3.8.2 Test specimens for the EN 13823 test 4.3.8.3 Mounting and fixing procedure 4.3.9 Continuous glowing combustion 4.3.10 Dangerous substances |
| 16 | 5 Test methods 5.1 Sampling and preparation of test specimens 5.1.1 Factory premixed EPS dry mortar 5.1.2 Bound EPS 5.2 Preparation of test specimen 5.3 Test results |
| 18 | 6 Designation code 7 Evaluation of conformity 7.1 General |
| 21 | Annex A (normative) Determination of the declared thermal conductivity A.1 General A.2 Input data A.3 Declared value of thermal conductivity |
| 23 | Annex B (normative) Initial type testing (ITT) and factory production control (FPC) B.1 Testing frequencies |
| 25 | B.2 Indirect testing |
| 26 | Annex C (normative) Testing for reaction to fire of products C.1 Scope C.2 Product and installation parameters |
| 27 | C.3 Standardised Mounting and fixing C.3.1 Ignitability (EN ISO 11925-2) C.3.1.1 Exposure to thermal attack C.3.1.2 Test specimens C.3.2 Single Burning Item [SBI] (EN 13823) C.3.2.1 Preparation of the test specimens C.3.2.2 Exposure to thermal attack C.3.2.3 Substrate |
| 28 | C.3.2.4 Air gaps/cavities C.3.2.5 Size and positioning of test specimen C.4 Fixing of the test specimen |
| 29 | C.5 Field of application |
| 31 | Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Directive ZA.1 Scope and relevant characteristics |
| 33 | ZA.2 Procedure for attestation of factory made bound EPS products ZA.2.1 Systems of attestation of conformity |
| 35 | ZA.2.2 EC Certificate and Declaration of Conformity |
| 36 | ZA.3 CE marking and labelling |
