ASTM-D6812:2004 Edition
$44.96
D6812-04 Standard Practice for Ground-Based Octane Rating Procedures for Turbocharged/Supercharged Spark Ignition Aircraft Engines
Published By | Publication Date | Number of Pages |
ASTM | 2004 | 14 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]
1.1 This practice covers ground-based octane rating procedures for turbocharged/supercharged spark ignition aircraft engines. This practice has been developed to allow the widest range of applicability possible but may not be appropriate for all engine types. This practice is specifically directed to ground-based testing and actual in-flight octane ratings may produce significantly different results.
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Title | D6812-04 Standard Practice for Ground-Based Octane Rating Procedures for Turbocharged/Supercharged Spark Ignition Aircraft Engines |
---|---|
Published Code | ASTM |
Publication Date | 2004 |
Pages Count | 14 |
ICS Codes | 75.160.20 - Liquid fuels |
Related products
-
ASTM-D6815:2022 Edition
D6815-22a Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and…
-
ASTM-D6112:2023 Edition(Redline)
D6112-23 Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and…
-
ASTM-D6819:2002 Edition
D6819-02e2 Standard Test Method for Accelerated Temperature Aging of Printing and Writing Paper by Dry…
-
ASTM-D6814:2024 Edition(Redline)
D6814-24 Standard Test Method for Determination of Percent Devulcanization of Crumb Rubber Based on Crosslink…
-
ASTM-D6112:2018 Edition(Redline)
D6112-18 Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and…
-
ASTM-D6810:2007 Edition
D6810-07 Standard Test Method for Measurement of Hindered Phenolic Antioxidant Content in Non-Zinc Turbine Oils…
-
ASTM-D6817:2002 Edition
D6817-02 Standard Specification for Rigid Cellular Polystyrene Geofoam Published By Publication Date Number of Pages…
-
ASTM-D6821:2018 Edition
D6821-18 Standard Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant…
-
ASTM-D6012:2013 Edition
D6012-03(2013) Standard Test Method for Determination of Resistance of Leather to (Bleeding) Color Stain Transfer…
-
ASTM-D6819:2007 Edition
D6819-02(2007) Standard Test Method for Accelerated Temperature Aging of Printing and Writing Paper by Dry…
-
ASTM-D6612:2011 Edition
D6612-00(2011) Standard Test Method for Yarn Number and Yarn Number Variability Using Automated Tester Published…
-
ASTM-D6412:2012 Edition
D6412/D6412M-99(2012) Standard Specification For Epoxy (Flexible) Adhesive For Bonding Metallic And Nonmetallic Materials Published By…
-
ASTM-D6821:2018 Edition(Redline)
D6821-18 Standard Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant…
-
ASTM-D6821:2017 Edition
D6821-17 Standard Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant…
-
ASTM-D6816:2021 Edition
D6816-21 Standard Practice for Determining Low-Temperature Performance Grade (PG) of Asphalt Binders Published By Publication…
-
ASTM-D6812:2019 Edition
D6812-04a(2019) Standard Practice for Ground-Based Octane Rating Procedures for Turbocharged/Supercharged Spark Ignition Aircraft Engines Published…
-
ASTM-D6817:2004 Edition
D6817-04 Standard Specification for Rigid Cellular Polystyrene Geofoam Published By Publication Date Number of Pages…
-
ASTM-D6814:2018 Edition
D6814-02(2018) Standard Test Method for Determination of Percent Devulcanization of Crumb Rubber Based on Crosslink…
-
ASTM-D6811:2007 Edition
D6811-02(2007) Standard Test Method for Measurement of Thermal Stability of Aviation Turbine Fuels under Turbulent…
-
ASTM-D6612:2016 Edition
D6612-00(2016) Standard Test Method for Yarn Number and Yarn Number Variability Using Automated Tester Published…
-
ASTM-D4812:2019 Edition
D4812-19 Standard Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics Published By Publication…
-
ASTM-D6821:2014 Edition(Redline)
D6821-14 Standard Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant…
-
ASTM-D6814:2002 Edition
D6814-02e1 Standard Test Method for Determination of Percent Devulcanization of Crumb Rubber Based on Crosslink…
-
ASTM-D6312:1998 Edition
D6312-98 Standard Guide for Developing Appropriate Statistical Approaches for Ground-Water Detection Monitoring Programs Published By…
-
ASTM-D6813:2007 Edition
D6813-02a(2007) Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps Published By Publication…
-
ASTM-D4812:2005 Edition
D4812-05 Standard Test Method for Unnotched Cantilever Beam Impact Strength of Plastics Published By Publication…
-
ASTM-D6512:2007 Edition(Redline)
D6512-07 Standard Practice for Interlaboratory Quantitation Estimate (Redline) Published By Publication Date Number of Pages…
-
ASTM-D6814:2024 Edition
D6814-24 Standard Test Method for Determination of Percent Devulcanization of Crumb Rubber Based on Crosslink…
-
ASTM-D6812:2010 Edition
D6812-04a(2010) Standard Practice for Ground-Based Octane Rating Procedures for Turbocharged/Supercharged Spark Ignition Aircraft Engines Published…
-
ASTM-D6819:2002 Edition
D6819-02e1 Standard Test Method for Accelerated Temperature Aging of Printing and Writing Paper by Dry…
-
ASTM-D6818:2018 Edition
D6818-18a Standard Test Method for Ultimate Tensile Properties of Rolled Erosion Control Products Published By…
-
ASTM-D6821:2007 Edition(Redline)
D6821-02(2007) Standard Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant…
-
ASTM-D6818:2021 Edition
D6818-21 Standard Test Method for Tensile Properties of Rolled Erosion Control Products Published By Publication…
-
ASTM-D6818:2017 Edition
D6818-17 Standard Test Method for Ultimate Tensile Properties of Rolled Erosion Control Products Published By…
-
ASTM-D6812:2014 Edition
D6812-04a(2014) Standard Practice for Ground-Based Octane Rating Procedures for Turbocharged/Supercharged Spark Ignition Aircraft Engines Published…
-
ASTM-D6821:2014 Edition
D6821-14 Standard Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant…
-
ASTM-D6810:2022 Edition
D6810-22 Standard Test Method for Measurement of Hindered Phenolic Antioxidant Content in Non-Zinc Turbine Oils…
-
ASTM-D6817:2007 Edition
D6817-07 Standard Specification for Rigid Cellular Polystyrene Geofoam Published By Publication Date Number of Pages…
-
ASTM-D6712:2017 Edition(Redline)
D6712-17 Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes (Redline) Published By Publication Date…
-
ASTM-D6812:2004 Edition
D6812-04a Standard Practice for Ground-Based Octane Rating Procedures for Turbocharged/Supercharged Spark Ignition Aircraft Engines Published…