ASTM-D4174:2015 Edition(Redline)

$33.15

D4174-15 Standard Practice for Cleaning, Flushing, and Purification of Petroleum Fluid Hydraulic Systems (Redline)

Published By	Publication Date	Number of Pages
ASTM	2015	14

Guaranteed Safe Checkout

Category: ASTM

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]

Description

1.1 This practice covers aid for the equipment manufacturer, the installer, the oil supplier and the operator in coordinating their efforts towards obtaining and maintaining clean petroleum fluid hydraulic systems. Of necessity, this practice is generalized due to variations in the type of equipment, builder’s practices, and operating conditions. Constant vigilance is required throughout all phases of design, fabrication, installation, flushing, testing, and operation of hydraulic systems to minimize and reduce the presence of contaminants and to obtain optimum system reliability.

1.2 This practice is presented in the following sequence:

1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Additional information

General Guidelines	9.6.1
Preparation of System for Flushing	9.2
Piping or Tubing Contamination Control System	6.1.4
Fluid Sampling Techniques	11.2
Special Flushing Oil	9.4.2
Lodged Contamination	5.4.2.1
Preinstallation	10.2
Suspended or Loose Contamination	5.4.2.2
Interim Corrosion Protection	9.5.7
Fluid Cleanliness Criteria	11.5
Contamination Control Procedures	6.2
Displacement Oil	9.5.6
Fluid Condition Monitoring	11
Terminology	3
Flushing Oil Selection Guide	9.4.3
Contamination Control	6
Vacuum Dehydration	12.4
Flushing of Used Systems	9.6
Pumps	8.2.4
Scope	1
Soluble Contaminants	5.3
Bypass Contamination Control	6.2.2
Selection of Flushing Oils	9.4
Flushing Program	9
Flushing Oil Charge	9.5.1
In-Service Units	10.3
Visual Inspection	11.3
Full Flow Contamination Control	6.2.1
General Information	12
Initial Filling	6.1.1
Cleaning of Filtration Devices	9.5.2
System Maintenance	10
Gravity	6.3.1
Batch Contamination Control	6.2.3
Insoluble Contaminants	5.4
New Fluid Charge	9.5.8
Centrifuge	6.3.2.1
Procedure	9.6.2
Flushing Procedure for New Systems	9.5
Draining of Flushing Oil	9.5.5
Control Devices	8.2.3
Filters	6.3.2.2
Valves, Strainers, and Coolers	8.2.1
Sumps and Tanks	8.2.2
Decision to Flush In-Service Hydraulic Systems	10.4
Laboratory Analysis	11.4
Centrifuge Ratings	12.2
Supplementary Methods	6.3.3
System Components	8.2
Water	5.2
Storage	7
Significance and Use	4
Limitations of Contamination Control Devices	6.3.4
	Section
Cleaning of System Components	9.5.3
General	9.1
Mechanical	6.3.2
Adsorption	12.5
System Flushing and Flush Acceptance Criteria	9.5.4
Connection of Contamination Control System	6.1.3
Coalescence	12.3
Types of Contamination	5
System Operation Fluid	9.4.1
Referenced Documents	2
Contamination Control Processes	6.3
Fluid Heating Prior to Flushing	9.3
Inspection	8

Preview PDF


PDF Format	Searchable	Printable	Preview Now

ASTM-D4174:2015 Edition(Redline)

Related products