🔥🔥 Don’t Miss Out on Our End of Autumn Sale. If you have any questions, feel free to click the bottom right corner to contact our customer service..

Concat us[email protected]
Shopping Cart

No products in the cart.

🔍
ASHRAE Standard 90.1 2001 IP

ASHRAE Standard 90.1 2001 IP

$67.71

ASHRAE Standard 90.1-2001 (I-P Edition) – Energy Standard for Buildings Except Low-Rise Residential Buildings (IESNA cosponsored; ANSI approved)

Published By Publication Date Number of Pages
ASHRAE 2001 451
PDF Format Searchable Printable Preview Now
Guaranteed Safe Checkout
Category:

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]

Incorporates 34 addenda to the 1999 version of the standard, covering a wide range of topics, as well as editorial changes and updates to the body of the standard. The incorporated addenda contain information on minimum energy efficiency standards, building envelope requirements, zone isolation, floor, ceiling and roof insulation, and power allowance calculation. The standard is written entirely in mandatory enforceable language suitable for code adoption. The Standard addresses national and international needs, and includes new information on alterations and additions to existing buildings, building envelope, wall and roof insulation, fenestration, recessed equipment, air leakage and more. This Standard also available in a separate SI-unit version. This standard is under continuous maintenance by a Standing Standard Project Committee for which the Standards Committee has established a documented schedule for publication of addenda or revision, including procedures for timely, documented consensus action on requests for change to any part of the standard

PDF Catalog

PDF Pages PDF Title
6 FOREWORD
FORewoRD
7 1.� PURPOSE
2.� SCOPE
3.� DEFINITIONS, ABBREVIATIONS, AND ACRONYMS
16 TABLE 3.2 Heated Space Criteria
19 4.� ADMINISTRATION AND ENFORCEMENT
21 5.� BUILDING ENVELOPE
22 Figure 5.3� Building Envelope
23 TABLE 5.3 Example Building Envelope Requirements (Values can be found in the appropriate tables i…
25 TABLE 5.3.1.1A Single Rafter Roofs
TABLE 5.3.1.1B Roof U-Factor Multipliers for Exception to 5.3.1.1
26 TABLE 5.3.2.3 SHGC Multipliers for Permanent Projections
29 6.� HEATING, VENTILATing, AND AIR CONDITIONING
TABLE 6.1.3 Eliminate Required Economizer by Increasing Cooling Efficiency
31 TABLE 6.2.1A Electrically Operated Unitary Air Conditioners and Condensing Units— Minimum Efficie…
32 TABLE 6.2.1B Electrically Operated Unitary and Applied Heat Pumps—Minimum Efficiency Requirements
33 TABLE 6.2.1C Water Chilling Packages–Minimum Efficiency Requirements
34 TABLE 6.2.1D Electrically Operated Packaged Terminal Air Conditioners, Packaged Terminal Heat Pum…
35 TABLE 6.2.1E Warm Air Furnaces and Combination Warm Air Furnaces/Air-Conditioning Units, Warm Air…
TABLE 6.2.1F Gas- and Oil-Fired Boilers–Minimum Efficiency Requirements
36 TABLE 6.2.1G Performance Requirements for Heat Rejection Equipment
37 TABLE 6.2.1H COPs for Centrifugal Chillers < 150 Tons COPstd = 5.0
38 TABLE 6.2.1I COPs for Centrifugal Chillers ³150 tons, £300 tons COPstd = 5.55
39 TABLE 6.2.1J COPs for Centrifugal Chillers >300 tons COPstd = 6.1
40 TABLE 6.2.1K IPLV/NPLV for Centrifugal Chillers < 150 Tons IPLVstd = 5.25
41 TABLE 6.2.1L IPLV/NPLV for Centrifugal Chillers ³ 150 Tons £ 300 Tons IPLVstd= 5.9
42 TABLE 6.2.1M IPLV/NPLV for Centrifugal Chillers > 300 Tons IPLVstd = 6.4
44 TABLE 6.2.3.3.4 Maximum Damper Leakage
45 TABLE 6.2.4.1.3 Minimum Pipe Insulation Thickness
47 TABLE 6.2.4.1.2A� Minimum Duct Insulation R-Value, Cooling and Heating Only Supply Ducts and Retu…
48 TABLE 6.2.4.1.2B Minimum Duct Insulation R-Value,a Combined Heating and Cooling Ducts
49 TABLE 6.2.4.2.1A Minimum Duct Seal Level
TABLE 6.2.4.2.1B Duct Seal Levels
50 TABLE 6.3.1 Minimum System Size for Which an Economizer is Required
51 TABLE 6.3.1.1.3A High-Limit Shutoff Control Options for Air Economizers
TABLE 6.3.1.1.3B High-Limit Shutoff Control Settings for Air Economizers
52 TABLE 6.3.3.1 Fan Power Limitation
54 TABLE 6.3.9 Hot Gas Bypass Limitation
7.� SERVICE WATER HEATING
55 TABLE 7.2.2 Performance Requirements for Water Heating Equipment
56 8.� POWER
57 9.� LIGHTING
58 TABLE 9.3.1.1 Lighting Power Densities Using the Building Area Method
60 TABLE 9.3.1.2 � Lighting Power Densities Using the Space-by-Space Method
63 TABLE 9.3.2 Lighting Power Limits for Building Exteriors
10.� OTHER EQUIPMENT
11.� ENERGY COST BUDGET METHOD
TABLE 10.2 Minimum Nominal Efficiency for General Purpose Design A and Design B Motors
67 Figure 11.4.3� HVAC Systems Map
TABLE 11.4.3A � Budget System Descriptions
69 TABLE 11.4.3B Number of Chillers
TABLE 11.4.3C Water Chiller Types
TABLE 11.4.3D Economizer High Limit Shut-off
70 12.� NORMATIVE REFERENCES
72 TABLE A-1 (Section A2.2) Assembly U-Factors for Roofs with Insulation Entirely Above Deck
73 TABLE A-2 (Section A2.3) Assembly U-Factors for Metal Building Roofs
74 TABLE A-3 (Section A2.4) Assembly U-Factors for Attic Roofs with Wood Joists
TABLE A-4 (Section A2.5) Assembly U-Factors for Attic Roofs with Steel Joists (4.0 ft on center)
75 TABLE A-5 (Section A3.1) � Assembly U-Factors for Above-Grade Concrete Walls and Masonry Walls
78 TABLE A-6 (Sections 5.3.1.2, A3.1, and A4.1) Assembly U-Factors, C-Factors, Ru, Rc, and Heat Capa…
79 TABLE A-7 (Sections 5.3.1.2, A3.1, and A4.1) � Assembly U-Factors, C-Factors, Ru, Rc, and Heat Ca…
81 TABLE A-8 (Sections A3.1.2 and A4.1.3) Effective R-Values for Insulation/Framing Layers Added to …
82 TABLE A-9 (Section A3.2) Assembly U-Factors for Metal Building Walls
83 TABLE A-10 (Section A3.3) Assembly U-Factors for Steel Frame Walls
84 TABLE A-11 (Section A3.4) Assembly U-Factors for Wood Frame Walls
85 TABLE A-12 (Section A4) Assembly C-Factors for Below-Grade Walls
86 TABLE A-13 (Section A5.2) Assembly U-Factors for Mass Floors
87 TABLE A-14 (Section A5.3) Assembly U-Factors for Steel Joist Floors
88 TABLE A-15 (Section A5.4) Assembly U-Factors for Wood Joist Floors
89 TABLE A-16 (Section A6) Assembly F-Factors for Slab-on-Grade Floors
91 TABLE A-17 (Section A8.1) � Assembly U-Factors for Unlabeled Skylights
93 TABLE A-18 (Section A8.1) Assembly Solar Heat Gain Coefficients (SHGC) and Assembly Visible Light…
94 TABLE A-19 (Section A8.2) Assembly U-Factors, Assembly Solar Heat Gain Coefficients (SHGC), and A…
TABLE A-20 (Section A9.2 and A9.4.2) Effective Insulation/Framing Layer R-Values for Roof and Flo…
95 TABLE A-21 (Sections A9.2 and A9.4.2) Effective Insulation/Framing Layer R-Values for Wall Insula…
96 TABLE A-22 (Section A9.4.1) Emittance Values of Various Surfaces and Effective Emittances of Air …
TABLE A-23 (Section A9.4.1) R-Values for Cavity Air Spaces
97 TABLE A-24 (Section A9.4.2) Effective R-Values for Fiberglass
98 TABLE A-25 (Section A9.4.3) R-Values for Building Materials
TABLE A-26 (Section A9.4.3) Thermal Conductivity of Concrete Block Material
99 Figure B-1� Climates for building envelope requirements.
100 TABLE B-1 Building Envelope Requirements (HDD65: 0-900, CDD50: 10801+)
101 TABLE B-2 Building Envelope Requirements (HDD65: 0-900, CDD50: 9001-10800)
102 TABLE B-3 Building Envelope Requirements (HDD65: 0-900, CDD50: 7201-9000)
103 TABLE B-4 Building Envelope Requirements (HDD65: 0-900, CDD50: 0-7200)
104 TABLE B-5 Building Envelope Requirements (HDD65: 901-1800, CDD50: 7201+)
105 TABLE B-6 Building Envelope Requirements (HDD65: 901-1800, CDD50: 5401-7200)
106 TABLE B-7 Building Envelope Requirements (HDD65: 901-1800, CDD50: 0-5400)
107 TABLE B-8 Building Envelope Requirements (HDD65: 1801-2700, CDD50: 5401+)
108 TABLE B-9 Building Envelope Requirements (HDD65: 1801-2700, CDD50: 0-5400)
109 TABLE B-10 Building Envelope Requirements (HDD65: 2701-3600, CDD50: 5401+)
110 TABLE B-11 Building Envelope Requirements (HDD65: 2701-3600, CDD50: 3601-5400)
111 TABLE B-12 Building Envelope Requirements (HDD65: 2701-3600, CDD50: 0-3600)
112 TABLE B-13 Building Envelope Requirements (HDD65: 3601-5400, CDD50: 3601+)
113 TABLE B-14 Building Envelope Requirements (HDD65: 3601-5400, CDD50: 1801-3600)
114 TABLE B-15 Building Envelope Requirements (HDD65: 3601-5400, CDD50: 0-1800)
115 TABLE B-16 Building Envelope Requirements (HDD65: 5401-7200, CDD50: 3601+)
116 TABLE B-17 Building Envelope Requirements (HDD65: 5401-7200, CDD50: 1801-3600)
117 TABLE B-18 Building Envelope Requirements (HDD65: 5401-7200, CDD50: 0-1800)
118 TABLE B-19 Building Envelope Requirements (HDD65: 7201-9000, CDD50: 1801+)
119 TABLE B-20 Building Envelope Requirements (HDD65: 7201-9000, CDD50: 0-1800)
120 TABLE B-21 Building Envelope Requirements (HDD65: 9001-10800, CDD50: 1801+)
121 TABLE B-22 Building Envelope Requirements (HDD65: 9001-10800, CDD50: 0-1800)
122 TABLE B-23 Building Envelope Requirements (HDD65: 10801-12600, CDD50: 0+)
123 TABLE B-24 Building Envelope Requirements (HDD65: 12601-16200, CDD50: 0+)
124 TABLE B-25 Building Envelope Requirements (HDD65: 16201-19800, CDD50: 0+)
125 TABLE B-26 Building Envelope Requirements (HDD65: 19801+, CDD50: 0+)
126 Figure C1.3� Skylight well dimensions.
127 TABLE C3.5 VLT Factor for the Base Envelope Design
128 TABLE C6.1 Input Variables
129 TABLE C6.5.1 Overhang Projection Coefficients
TABLE C6.6 Coefficients for Calculating Kd
130 TABLE C6.7A Cooling Delta Load Coefficients
TABLE C6.7B Heating Delta Load Coefficients
132 TABLE C6.8.2 Cooling Coefficients for the Exterior Wall Equation
133 TABLE C6.8.3 Heating Coefficients for the Exterior Wall Equation
TABLE C6.9 Heating and Cooling Coefficients for Skylights
134 TABLE C6.10.1 Effective R-Value of Soil for Below-Grade Walls
TABLE 6.10.3 Heating and Cooling Coefficients for Other Exterior and Semi-Exterior Surfaces
135 TABLE D-1 � U.S. Climatic Data
158 TABLE D-2 � Canadian Climatic Data
161 TABLE D-3 � International Climatic Data
171 TABLE F-1� Addenda to ANSI/ASHRAE/IESNA Standard 90.1-1999; Changes Identified
173 TABLE F-2� Addenda to ANSI/ASHRAE/IESNA Standard 90.1-1999, Approval Dates
274 Foreword
275 TABLE 9.3.2 Lighting Power Limits for Building Exteriors
TABLE 9.3.2 Lighting Power Densities for Building Exteriors
276 TABLE 9.3.2 Lighting Power Densities for Building Exteriors
298 Foreword
TABLE 6.3.1.1.3A High-Limit Shutoff Control Options for Air Economizers
300 TABLE 6.3.1.1.3.B High-Limit Shutoff Control Settings for Air Economizers
331 Foreword
337 Foreword
359 Foreword
364 Foreword
370 Foreword
371 TABLE 5.3.1.1A Single Rafter Roofs
TABLE 5.3.1.1A Single Rafter Roofs
373 TABLE B-25.3-1 Building Envelope Requirements For Climate Zone 1 (A,B) (HDD65: 0-900, CDD50: 9001-10800)
381 TABLE B-135.3-4 Building Envelope Requirements For Climate Zone 4 (A,B,C) (HDD65: 3601-5400, CDD50: 3601+)
382 TABLE B-135.3-4 Building Envelope Requirements For Climate Zone 4 (A,B,C) (HDD18: 2001-3000, CDD10: 2001+)
383 TABLE B-175.3-5 Building Envelope Requirements For Climate Zone 5 (A,B,C) (HDD65: 5401-7200, CDD50: 1801-3600)
384 TABLE B-175.3-5 Building Envelope Requirements For Climate Zone 5 (A,B,C) (HDD18: 3001-4000, CDD10: 1001-2000)
385 TABLE B-195.3-6 Building Envelope Requirements For Climate Zone 6 (A,B) (HDD65: 7201-9000, CDD50: 1801+)
387 TABLE B-225.3-7 Building Envelope Requirements For Climate Zone 7(HDD65: 9001-10800, CDD50: 0-1800)
388 TABLE B-225.3-7 Building Envelope Requirements For Climate Zone 7 (HDD18: 5001-6000, CDD10: 0-1000)
390 TABLE B-245.3-8 Building Envelope Requirements For Climate Zone 8 (HDD18: 7001-9000, CDD10: 0+)
391 TABLE 6.1.3 Eliminate Required Economizer by Increasing Cooling Efficiency
392 TABLE 6.1.3 Eliminate Required Economizer by Increasing Cooling Efficiency
393 TABLE 6.2.3.3.4 Maximum Damper Leakage
394 TABLE 6.2.4.2A Minimum Duct Insulation R-Value,a Cooling and Heating Only, Supply Ducts and Return Ducts
395 TABLE 6.2.4.2A Minimum Duct Insulation R-Value,a Cooling and Heating Only, Supply Ducts and Return Ducts
396 TABLE 6.2.4.2B Minimum Duct Insulation R-Value,a Combined Heating and Cooling Ducts
398 TABLE 6.2.4.2A Minimum Duct Insulation R-Value,a Cooling and Heating Only Supply Ducts and Return Ducts
402 TABLE 6.3.1 Minimum System Size for Which an Economizer is Required
TABLE 6.3.1 Minimum System Size for Which an Economizer is Required
403 TABLE 6.3.1.1.3A High Limit Shutoff Control Options for Air Economizers
TABLE 6.3.1.1.3A High Limit Shutoff Control Options for Air Economizers
404 TABLE 6.3.1.1.3B High Limit Shutoff Control Settings for Air Economizers
TABLE 6.3.1.1.3B High Limit Shutoff Control Settings for Air Economizers
406 Figure B-1 Climate zones for United States locations.
423 TABLE B-4 INTERNATIONAL CLIMATE ZONE DEFINITIONS
436 January 25, 2004
437 January 25, 2004
 
439 January 25, 2004
442 February 7, 2005
447 February 7, 2005
448 Erratum

Related products

ASHRAE Standard 90.1 2001 IP
$67.71